/*
 * This is the project ``config'' file.  It controls many aspects of
 * how Aegis interacts with your project.
 *
 * There are several sections of this file, each dealing with a different
 * aspect of the interaction between Aegis and the tools used to manage
 * yout project.
 */

/*
 * -------------------------------------------------------------------------
 *
 * The build tool is delegated.
 *
 * The make(1) program exists in many forms, usually one is available
 * with each UNIX version.  The one used in the writing of this section
 * is GNU Make 3.70, avaiable by anonymous FTP from your nearest GNU
 * archive site.  GNU Make was chosen because it was the most powerful,
 * it is widely avaiable (usually for little or no cost) and discussion
 * of the alternatives (SunOS make, BSD 4.3 make, etc), would not be
 * universally applicable.  "Plain vanilla" make (with no transitive
 * closure, no pattern rules, no functions) is not sufficiently capable
 * to satisfy the demands placed on it by aegis.
 *
 * As mentioned in the Dependency Maintenance Tool chapter of the
 * User Guide, make is not really sufficient, because it lacks dynamic
 * include dependencies.  However, GNU Make has a form of dynamic include
 * dependencies, and it has a few quirks, but mostly works well.
 *
 * The other feature lacking in make is a search path.  While GNU Make has
 * functionality called VPATH, the implementation leaves something to be
 * desired, and can't be used for the search path functionality required
 * by aegis.  Because of this, the create_symlinks_before_build field
 * of the project config file is set to true so that aegis will arrange
 * for the development directory to be fiull of symbolic links, making
 * it appear that the entire project is in each change's development
 * directory.
 */

/*
 * The build_command field of the project config file is used to invoke
 * the relevant build command.  This command tells make where to find
 * the rules.  The ${s Makefile} expands to a path into the baseline
 * during development if the file is not in the change.  Look in aesub(5)
 * for more information about command substitutions.
 */
build_command =
	"gmake -f ${s Makefile} -j2 MPI=1 project=$p change=$c version=$v AEGIS=1";

/*
 * The rules used in the User Guide all remove their targets before
 * constructing them, which qualifies them for the follwoing entry in
 * the config file.  The files must be removed first, otherwise the
 * baseline would cease to be self-consistent.
 */
link_integration_directory = true;

/*
 * Another field to be set in this file is one which tells aegis to
 * maintain symbolic links between the development directory and the
 * basline.  This also requires that rules remove their targets before
 * constructing them, to ensure that development builds do not attempt
 * to write their results onto the read-only versions in the baseline.
 */
development_directory_style =
{
        source_file_symlink = true;
};
integration_directory_style =
{
        source_file_symlink = true;
};

/*
 * -------------------------------------------------------------------------
 *
 * The history tool is delegated.
 *
 * The entries for the commands are listed below.  RCS uses a slightly
 * different model than aegis wants, so some maneuvering is required.
 * The command strings in this section assume that the RCS commands
 * ci and co and rcs and rlog are in the command search PATH, but you
 * may like to hard-wire the paths, or set PATH at the start of each.
 * You should also note that the strings are always handed to the Bourne
 * shell to be executed, and are set to exit with an error immediately
 * a sub-command fails.
 *
 * In these commands, the RCS file is kept unlocked, since only the owner
 * will be checking changes in.  The RCS functionality for coordinating
 * shared access is not required.
 *
 * One advantage of using RCS version 5.6 or later is that binary files
 * are supported, should you want to have binary files in the baseline.
 *
 * The ${quote ...} construct is used to quote filenames which contain
 * shell special characters.  A minimum of quoting is performed, so if
 * the filenames do not contail shell special characters, no quotes will
 * be used.
 */

/*
 * This command is used to create a new file history.
 * This command is always executed as the project owner.
 * The following substitutions are available:
 *
 * ${Input}
 *	absolute path of the source file
 * ${History}
 *	absolute path of the history file
 *
 * The "ci -f" option is used to specify that a copy is to be checked-in even
 *	if there are no changes.
 * The "ci -u" option is used to specify that an unlocked copy will remain in
 *	the baseline.
 * The "ci -d" option is used to specify that the file time rather than the
 *	current time is to be used for the new revision.
 * The "ci -M" option is used to specify that the mode date on the original
 *	file is not to be altered.
 * The "ci -t" option is used to specify that there is to be no description
 *	text for the new RCS file.
 * The "ci -m" option is used to specify that the change number is to be stored
 *	in the file log if this is actually an update (typically from aenf
 *	after aerm on the same file name).
 * The "rcs -U" option is used to specify that the new RCS file is to have
 *	unstrict locking.
 */
history_create_command =
	"ci -f -u -d -M -m$c -t/dev/null ${quote $input} ${quote $history,v}; \
rcs -U ${quote $history,v}";


/*
 * This command is used to get a specific edit back from history.
 * This command is always executed as the project owner.
 * The following substitutions are available:
 *
 * ${History}
 *	absolute path of the history file
 * ${Edit}
 *	edit number, as given by history_\%query_\%command
 * ${Output}
 *	absolute path of the destination file
 *
 * The "co -r" option is used to specify the edit to be retrieved.
 * The "co -p" option is used to specify that the results be printed on the
 *	standard output; this is because the destination filename will never
 *	look anything like the history source filename.
 */
history_get_command =
	"co -r${quote $edit} -p ${quote $history,v} > ${quote $output}";

/*
 * This command is used to add a new "top-most" entry to the history file.
 * This command is always executed as the project owner.
 * The following substitutions are available:
 *
 * ${Input}
 *	absolute path of source file
 * ${History}
 *	absolute path of history file
 *
 * The "ci -f" option is used to specify that a copy is to be checked-in even
 *	if there are no changes.
 * The "ci -u" option is used to specify that an unlocked copy will remain in
 *	the baseline.
 * The "ci -d" option is used to specify that the file time rather than the
 *	current time is to be used for the new revision.
 * The "ci -M" option is used to specify that the mode date on the original
 *	file is not to be altered.
 * The "ci -m" option is used to specify that the change number is to be stored
 *	in the file log, which allows rlog to be used to find the change
 *	numbers to which each revision of the file corresponds.
 *
 * It is possible for a a very cautious approach has been taken, in which case
 * the history_put_command may be set to the same string specified above for
 * the history_create_command.
 */
history_put_command =
	"ci -f -u -d -M -m$c ${quote $input} ${quote $history,v}";

/*
 * This command is used to query what the history mechanism calls the top-most
 * edit of a history file.  The result may be any arbitrary string, it need not
 * be anything like a number, just so long as it uniquely identifies the edit
 * for use by the history_get_command at a later date.  The edit number is to
 * be printed on the standard output.  This command is always executed as the
 * project owner.
 *
 * The following substitutions are available:
 *
 * ${History}
 *	absolute path of the history file
 */
history_query_command =
	"rlog -r ${quote $history,v} | awk '/^head:/ {print $$2}'";

/*
 * -------------------------------------------------------------------------
 *
 * The difference and merge tools are delegated.  The merge command is
 * taken from RCS, but the diff command is taken from fhist (diff -c is
 * less than useful).
 */

/*
 * RCS also provides a merge program, which can be used to provide a three-way
 * merge.  It has an ouput format some sites prefer to the fmerge output.
 *
 * This command is used by aed(1) to produce a difference listing when a file
 * in the development directory is out of date compared to the current version
 * in the baseline.
 *
 * All of the command substitutions described in aesub(5) are available.
 * In addition, the following substitutions are also available:
 *
 * ${ORiginal}
 *	The absolute path name of a file containing the common ancestor
 *	version of ${MostRecent} and {$Input}.  Usually the version originally
 *	copied into the change.  Usually in a temporary file.
 * ${Most_Recent}
 *	The absolute path name of a file containing the most recent version.
 *	Usually in the baseline.
 * ${Input}
 *	The absolute path name of the edited version of the file.  Usually in
 *	the development directory.
 * ${Output}
 *	The absolute path name of the file in which to write the difference
 *	listing.  Usually in the development directory.
 *
 * An exit status of 0 means successful, even of the files differ (and they
 * usually do).  An exit status which is non-zero means something is wrong.
 *
 * The "merge -L" options are used to specify labels for the baseline and the
 *	development directory, respecticvely, when conflict lines are inserted
 *	into the result.
 * The "merge -p" options is used to specify that the results are to be printed
 *	on the standard output.
 */

merge_command =
	"set +e; \
merge -p -L baseline -L C$c ${quote $mostrecent} ${quote $original} \
${quote $input} > ${quote $output}; \
test $? -le 1";

/*
 * Compare two files using fcomp.  The -w option produces an output of
 * the entire file, with insertions an deletions marked by "change bars"
 * in the left margin.  This is superior to context difference, as it
 * shows the entire file as context.  The -s option could be added to
 * compare runs of white space as equal.
 *
 * This command is used by aed(1) to produce a difference listing when
 * file in the development directory was originally copied from the
 * current version in the baseline.
 *
 * All of the command substitutions described in aesub(5) are available.
 * In addition, the following substitutions are also available:
 *
 * ${ORiginal}
 *	The absolute path name of a file containing the version
 *	originally copied.  Usually in the baseline.
 * ${Input}
 *	The absolute path name of the edited version of the file.
 *	Usually in the development directory.
 * ${Output}
 *	The absolute path name of the file in which to write the
 *	difference listing.  Usually in the development directory.
 *
 * An exit status of 0 means successful, even of the files differ (and
 * they usually do).  An exit status which is non-zero means something
 * is wrong.
 *
 * The non-zero exit status may be used to overload this command with
 * extra tests, such as line length limits.  The difference files must
 * be produced in addition to these extra tests.
 */
diff_command =
	"fcomp -w ${quote $original} ${quote $input} -o ${quote $output}";

/*
 * -------------------------------------------------------------------------
 *
 * The new file templates are very handy.  They allow all sorts of things
 * to be se automatically.  You need to edit them to add your own name,
 * and copyright conditions.
 */

file_template =
[
	{
		pattern = [ "*.[cyl]" ];
		body = "${read_file ${source template/c abs}}";
	},
	{
		pattern = [ "*.h" ];
		body = "${read_file ${source template/h abs}}";
	},
	{
		pattern = [ "test/*/*.sh" ];
		body = "${read_file ${source template/test abs}}";
	},
	{
		pattern = [ "*.sh" ];
		body = "${read_file ${source template/sh abs}}";
	},
	{
		pattern = [ "*.man", "*.[12345678]" ];
		body = "${read_file ${source template/man abs}}";
	},
	{
		pattern = [ "*.so", "*.ms", "*.me" ];
		body = "${read_file ${source template/ms abs}}";
	},
	{
		pattern = [ "*" ];
		body = "${read_file ${source template/generic abs}}";
	}
];

/* -------------------------------------------------------------------------
 *
 * The symlink exceptions are files which are not symbolically linked
 * from the baseline to the development directory.  In this case, this
 * is done to ensure the version stmp is updated appropriately.
 */

symlink_exceptions =
[
	"*,*",
	"*.d",
	"*.o",
        "*.a",
        "*.cd",
	"include/unpack_base.h",
	"models/classdesc.h",
	"models/classdesc.a",
	"models/classdesc-lib.cc",
	"models/classdesc-lib/*",
	"*.idx"	
];

integrate_begin_exceptions =
[
	"*.d",
        "*.cd",
	"models/classdesc.h",
	"models/classdesc.a",
	"models/classdesc-lib.cc",
	"models/classdesc-lib/*",
	"models/classdesc-lib",
/*
	"include/unpack_base.h",
        "classdesc-lib",
*/
	"*.idx"	
];


/* -------------------------------------------------------------------------
 *
 * The trojan_horse_suspect field is a list of filename patterns which
 * indicate files which *could* host a Trojan horse attack.  It makes
 * aedist --receive more cautions.  It is NOT a silver bullet: just
 * about ANY file can host a Trojan, one way or the other.
 */

trojan_horse_suspect =
[
	"*.awk",
	"*.pl",
	"*.sh",
	"[mM]akefile",
];