/*

* FreeRTOS Kernel V10.4.1

* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.

*

* Permission is hereby granted, free of charge, to any person obtaining a copy of

* this software and associated documentation files (the "Software"), to deal in

* the Software without restriction, including without limitation the rights to

* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of

* the Software, and to permit persons to whom the Software is furnished to do so,

* subject to the following conditions:

*

* The above copyright notice and this permission notice shall be included in all

* copies or substantial portions of the Software.

*

* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR

* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER

* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

*

* https://www.FreeRTOS.org

* https://github.com/FreeRTOS

*

*/

#ifndef INC_ARDUINO_FREERTOS_H

#define INC_ARDUINO_FREERTOS_H

/*

* Include the generic headers required for the FreeRTOS port being used.

*/

#include <stddef.h>

/*

* If stdint.h cannot be located then:

* + If using GCC ensure the -nostdint options is *not* being used.

* + Ensure the project's include path includes the directory in which your

* compiler stores stdint.h.

* + Set any compiler options necessary for it to support C99, as technically

* stdint.h is only mandatory with C99 (FreeRTOS does not require C99 in any

* other way).

* + The FreeRTOS download includes a simple stdint.h definition that can be

* used in cases where none is provided by the compiler. The files only

* contains the typedefs required to build FreeRTOS. Read the instructions

* in FreeRTOS/source/stdint.readme for more information.

*/

#include <stdint.h> /* READ COMMENT ABOVE. */

/* *INDENT-OFF* */

#ifdef __cplusplus

extern "C" {

#endif

/* *INDENT-ON* */

/* Application specific configuration options. */

#include "FreeRTOSConfig.h"

/* Basic FreeRTOS definitions. */

#include "projdefs.h"

/* Definitions specific to the port being used. */

#include "portable.h"

/* Must be defaulted before configUSE_NEWLIB_REENTRANT is used below. */

#ifndef configUSE_NEWLIB_REENTRANT

#define configUSE_NEWLIB_REENTRANT 0

#endif

/* Required if struct _reent is used. */

#if ( configUSE_NEWLIB_REENTRANT == 1 )

#include <reent.h>

#endif

/*

* Check all the required application specific macros have been defined.

* These macros are application specific and (as downloaded) are defined

* within FreeRTOSConfig.h.

*/

#ifndef configMINIMAL_STACK_SIZE

#error Missing definition: configMINIMAL_STACK_SIZE must be defined in FreeRTOSConfig.h. configMINIMAL_STACK_SIZE defines the size (in words) of the stack allocated to the idle task. Refer to the demo project provided for your port for a suitable value.

#endif

#ifndef configMAX_PRIORITIES

#error Missing definition: configMAX_PRIORITIES must be defined in FreeRTOSConfig.h. See the Configuration section of the FreeRTOS API documentation for details.

#endif

#if configMAX_PRIORITIES < 1

#error configMAX_PRIORITIES must be defined to be greater than or equal to 1.

#endif

#ifndef configUSE_PREEMPTION

#error Missing definition: configUSE_PREEMPTION must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.

#endif

#ifndef configUSE_IDLE_HOOK

#error Missing definition: configUSE_IDLE_HOOK must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.

#endif

#ifndef configUSE_TICK_HOOK

#error Missing definition: configUSE_TICK_HOOK must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.

#endif

#ifndef configUSE_16_BIT_TICKS

#error Missing definition: configUSE_16_BIT_TICKS must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.

#endif

#ifndef configUSE_CO_ROUTINES

#define configUSE_CO_ROUTINES 0

#endif

#ifndef INCLUDE_vTaskPrioritySet

#define INCLUDE_vTaskPrioritySet 0

#endif

#ifndef INCLUDE_uxTaskPriorityGet

#define INCLUDE_uxTaskPriorityGet 0

#endif

#ifndef INCLUDE_vTaskDelete

#define INCLUDE_vTaskDelete 0

#endif

#ifndef INCLUDE_vTaskSuspend

#define INCLUDE_vTaskSuspend 0

#endif

#ifndef INCLUDE_vTaskDelayUntil

#define INCLUDE_vTaskDelayUntil 0

#endif

#ifndef INCLUDE_vTaskDelay

#define INCLUDE_vTaskDelay 0

#endif

#ifndef INCLUDE_xTaskGetIdleTaskHandle

#define INCLUDE_xTaskGetIdleTaskHandle 0

#endif

#ifndef INCLUDE_xTaskAbortDelay

#define INCLUDE_xTaskAbortDelay 0

#endif

#ifndef INCLUDE_xQueueGetMutexHolder

#define INCLUDE_xQueueGetMutexHolder 0

#endif

#ifndef INCLUDE_xSemaphoreGetMutexHolder

#define INCLUDE_xSemaphoreGetMutexHolder INCLUDE_xQueueGetMutexHolder

#endif

#ifndef INCLUDE_xTaskGetHandle

#define INCLUDE_xTaskGetHandle 0

#endif

#ifndef INCLUDE_uxTaskGetStackHighWaterMark

#define INCLUDE_uxTaskGetStackHighWaterMark 0

#endif

#ifndef INCLUDE_eTaskGetState

#define INCLUDE_eTaskGetState 0

#endif

#ifndef INCLUDE_xTaskResumeFromISR

#define INCLUDE_xTaskResumeFromISR 1

#endif

#ifndef INCLUDE_xTimerPendFunctionCall

#define INCLUDE_xTimerPendFunctionCall 0

#endif

#ifndef INCLUDE_xTaskGetSchedulerState

#define INCLUDE_xTaskGetSchedulerState 0

#endif

#ifndef INCLUDE_xTaskGetCurrentTaskHandle

#define INCLUDE_xTaskGetCurrentTaskHandle 0

#endif

#if configUSE_CO_ROUTINES != 0

#ifndef configMAX_CO_ROUTINE_PRIORITIES

#error configMAX_CO_ROUTINE_PRIORITIES must be greater than or equal to 1.

#endif

#endif

#ifndef configUSE_DAEMON_TASK_STARTUP_HOOK

#define configUSE_DAEMON_TASK_STARTUP_HOOK 0

#endif

#ifndef configUSE_APPLICATION_TASK_TAG

#define configUSE_APPLICATION_TASK_TAG 0

#endif

#ifndef configNUM_THREAD_LOCAL_STORAGE_POINTERS

#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0

#endif

#ifndef configUSE_RECURSIVE_MUTEXES

#define configUSE_RECURSIVE_MUTEXES 0

#endif

#ifndef configUSE_MUTEXES

#define configUSE_MUTEXES 0

#endif

#ifndef configUSE_TIMERS

#define configUSE_TIMERS 0

#endif

#ifndef configUSE_COUNTING_SEMAPHORES

#define configUSE_COUNTING_SEMAPHORES 0

#endif

#ifndef configUSE_ALTERNATIVE_API

#define configUSE_ALTERNATIVE_API 0

#endif

#ifndef portCRITICAL_NESTING_IN_TCB

#define portCRITICAL_NESTING_IN_TCB 0

#endif

#ifndef configMAX_TASK_NAME_LEN

#define configMAX_TASK_NAME_LEN 16

#endif

#ifndef configIDLE_SHOULD_YIELD

#define configIDLE_SHOULD_YIELD 1

#endif

#if configMAX_TASK_NAME_LEN < 1

#error configMAX_TASK_NAME_LEN must be set to a minimum of 1 in FreeRTOSConfig.h

#endif

#ifndef configASSERT

#define configASSERT( x )

#define configASSERT_DEFINED 0

#else

#define configASSERT_DEFINED 1

#endif

/* configPRECONDITION should be defined as configASSERT.

* The CBMC proofs need a way to track assumptions and assertions.

* A configPRECONDITION statement should express an implicit invariant or

* assumption made. A configASSERT statement should express an invariant that must

* hold explicit before calling the code. */

#ifndef configPRECONDITION

#define configPRECONDITION( X ) configASSERT( X )

#define configPRECONDITION_DEFINED 0

#else

#define configPRECONDITION_DEFINED 1

#endif

#ifndef portMEMORY_BARRIER

#define portMEMORY_BARRIER()

#endif

#ifndef portSOFTWARE_BARRIER

#define portSOFTWARE_BARRIER()

#endif

/* The timers module relies on xTaskGetSchedulerState(). */

#if configUSE_TIMERS == 1

#ifndef configTIMER_TASK_PRIORITY

#error If configUSE_TIMERS is set to 1 then configTIMER_TASK_PRIORITY must also be defined.

#endif /* configTIMER_TASK_PRIORITY */

#ifndef configTIMER_QUEUE_LENGTH

#error If configUSE_TIMERS is set to 1 then configTIMER_QUEUE_LENGTH must also be defined.

#endif /* configTIMER_QUEUE_LENGTH */

#ifndef configTIMER_TASK_STACK_DEPTH

#error If configUSE_TIMERS is set to 1 then configTIMER_TASK_STACK_DEPTH must also be defined.

#endif /* configTIMER_TASK_STACK_DEPTH */

#endif /* configUSE_TIMERS */

#ifndef portSET_INTERRUPT_MASK_FROM_ISR

#define portSET_INTERRUPT_MASK_FROM_ISR() 0

#endif

#ifndef portCLEAR_INTERRUPT_MASK_FROM_ISR

#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusValue ) ( void ) uxSavedStatusValue

#endif

#ifndef portCLEAN_UP_TCB

#define portCLEAN_UP_TCB( pxTCB ) ( void ) pxTCB

#endif

#ifndef portPRE_TASK_DELETE_HOOK

#define portPRE_TASK_DELETE_HOOK( pvTaskToDelete, pxYieldPending )

#endif

#ifndef portSETUP_TCB

#define portSETUP_TCB( pxTCB ) ( void ) pxTCB

#endif

#ifndef configQUEUE_REGISTRY_SIZE

#define configQUEUE_REGISTRY_SIZE 0U

#endif

#if ( configQUEUE_REGISTRY_SIZE < 1 )

#define vQueueAddToRegistry( xQueue, pcName )

#define vQueueUnregisterQueue( xQueue )

#define pcQueueGetName( xQueue )

#endif

#ifndef portPOINTER_SIZE_TYPE

#define portPOINTER_SIZE_TYPE uint32_t

#endif

/* Remove any unused trace macros. */

#ifndef traceSTART

/* Used to perform any necessary initialisation - for example, open a file

* into which trace is to be written. */

#define traceSTART()

#endif

#ifndef traceEND

/* Use to close a trace, for example close a file into which trace has been

* written. */

#define traceEND()

#endif

#ifndef traceTASK_SWITCHED_IN

/* Called after a task has been selected to run. pxCurrentTCB holds a pointer

* to the task control block of the selected task. */

#define traceTASK_SWITCHED_IN()

#endif

#ifndef traceINCREASE_TICK_COUNT

/* Called before stepping the tick count after waking from tickless idle

* sleep. */

#define traceINCREASE_TICK_COUNT( x )

#endif

#ifndef traceLOW_POWER_IDLE_BEGIN

/* Called immediately before entering tickless idle. */

#define traceLOW_POWER_IDLE_BEGIN()

#endif

#ifndef traceLOW_POWER_IDLE_END

/* Called when returning to the Idle task after a tickless idle. */

#define traceLOW_POWER_IDLE_END()

#endif

#ifndef traceTASK_SWITCHED_OUT

/* Called before a task has been selected to run. pxCurrentTCB holds a pointer

* to the task control block of the task being switched out. */

#define traceTASK_SWITCHED_OUT()

#endif

#ifndef traceTASK_PRIORITY_INHERIT

/* Called when a task attempts to take a mutex that is already held by a

* lower priority task. pxTCBOfMutexHolder is a pointer to the TCB of the task

* that holds the mutex. uxInheritedPriority is the priority the mutex holder

* will inherit (the priority of the task that is attempting to obtain the

* muted. */

#define traceTASK_PRIORITY_INHERIT( pxTCBOfMutexHolder, uxInheritedPriority )

#endif

#ifndef traceTASK_PRIORITY_DISINHERIT

/* Called when a task releases a mutex, the holding of which had resulted in

* the task inheriting the priority of a higher priority task.

* pxTCBOfMutexHolder is a pointer to the TCB of the task that is releasing the

* mutex. uxOriginalPriority is the task's configured (base) priority. */

#define traceTASK_PRIORITY_DISINHERIT( pxTCBOfMutexHolder, uxOriginalPriority )

#endif

#ifndef traceBLOCKING_ON_QUEUE_RECEIVE

/* Task is about to block because it cannot read from a

* queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore

* upon which the read was attempted. pxCurrentTCB points to the TCB of the

* task that attempted the read. */

#define traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue )

#endif

#ifndef traceBLOCKING_ON_QUEUE_PEEK

/* Task is about to block because it cannot read from a

* queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore

* upon which the read was attempted. pxCurrentTCB points to the TCB of the

* task that attempted the read. */

#define traceBLOCKING_ON_QUEUE_PEEK( pxQueue )

#endif

#ifndef traceBLOCKING_ON_QUEUE_SEND

/* Task is about to block because it cannot write to a

* queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore

* upon which the write was attempted. pxCurrentTCB points to the TCB of the

* task that attempted the write. */

#define traceBLOCKING_ON_QUEUE_SEND( pxQueue )

#endif

#ifndef configCHECK_FOR_STACK_OVERFLOW

#define configCHECK_FOR_STACK_OVERFLOW 0

#endif

#ifndef configRECORD_STACK_HIGH_ADDRESS

#define configRECORD_STACK_HIGH_ADDRESS 0

#endif

#ifndef configINCLUDE_FREERTOS_TASK_C_ADDITIONS_H

#define configINCLUDE_FREERTOS_TASK_C_ADDITIONS_H 0

#endif

/* The following event macros are embedded in the kernel API calls. */

#ifndef traceMOVED_TASK_TO_READY_STATE

#define traceMOVED_TASK_TO_READY_STATE( pxTCB )

#endif

#ifndef tracePOST_MOVED_TASK_TO_READY_STATE

#define tracePOST_MOVED_TASK_TO_READY_STATE( pxTCB )

#endif

#ifndef traceQUEUE_CREATE

#define traceQUEUE_CREATE( pxNewQueue )

#endif

#ifndef traceQUEUE_CREATE_FAILED

#define traceQUEUE_CREATE_FAILED( ucQueueType )

#endif

#ifndef traceCREATE_MUTEX

#define traceCREATE_MUTEX( pxNewQueue )

#endif

#ifndef traceCREATE_MUTEX_FAILED

#define traceCREATE_MUTEX_FAILED()

#endif

#ifndef traceGIVE_MUTEX_RECURSIVE

#define traceGIVE_MUTEX_RECURSIVE( pxMutex )

#endif

#ifndef traceGIVE_MUTEX_RECURSIVE_FAILED

#define traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex )

#endif

#ifndef traceTAKE_MUTEX_RECURSIVE

#define traceTAKE_MUTEX_RECURSIVE( pxMutex )

#endif

#ifndef traceTAKE_MUTEX_RECURSIVE_FAILED

#define traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex )

#endif

#ifndef traceCREATE_COUNTING_SEMAPHORE

#define traceCREATE_COUNTING_SEMAPHORE()

#endif

#ifndef traceCREATE_COUNTING_SEMAPHORE_FAILED

#define traceCREATE_COUNTING_SEMAPHORE_FAILED()

#endif

#ifndef traceQUEUE_SET_SEND

#define traceQUEUE_SET_SEND traceQUEUE_SEND

#endif

#ifndef traceQUEUE_SEND

#define traceQUEUE_SEND( pxQueue )

#endif

#ifndef traceQUEUE_SEND_FAILED

#define traceQUEUE_SEND_FAILED( pxQueue )

#endif

#ifndef traceQUEUE_RECEIVE

#define traceQUEUE_RECEIVE( pxQueue )

#endif

#ifndef traceQUEUE_PEEK

#define traceQUEUE_PEEK( pxQueue )

#endif

#ifndef traceQUEUE_PEEK_FAILED

#define traceQUEUE_PEEK_FAILED( pxQueue )

#endif

#ifndef traceQUEUE_PEEK_FROM_ISR

#define traceQUEUE_PEEK_FROM_ISR( pxQueue )

#endif

#ifndef traceQUEUE_RECEIVE_FAILED

#define traceQUEUE_RECEIVE_FAILED( pxQueue )

#endif

#ifndef traceQUEUE_SEND_FROM_ISR

#define traceQUEUE_SEND_FROM_ISR( pxQueue )

#endif

#ifndef traceQUEUE_SEND_FROM_ISR_FAILED

#define traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue )

#endif

#ifndef traceQUEUE_RECEIVE_FROM_ISR

#define traceQUEUE_RECEIVE_FROM_ISR( pxQueue )

#endif

#ifndef traceQUEUE_RECEIVE_FROM_ISR_FAILED

#define traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue )

#endif

#ifndef traceQUEUE_PEEK_FROM_ISR_FAILED

#define traceQUEUE_PEEK_FROM_ISR_FAILED( pxQueue )

#endif

#ifndef traceQUEUE_DELETE

#define traceQUEUE_DELETE( pxQueue )

#endif

#ifndef traceTASK_CREATE

#define traceTASK_CREATE( pxNewTCB )

#endif

#ifndef traceTASK_CREATE_FAILED

#define traceTASK_CREATE_FAILED()

#endif

#ifndef traceTASK_DELETE

#define traceTASK_DELETE( pxTaskToDelete )

#endif

#ifndef traceTASK_DELAY_UNTIL

#define traceTASK_DELAY_UNTIL( x )

#endif

#ifndef traceTASK_DELAY

#define traceTASK_DELAY()

#endif

#ifndef traceTASK_PRIORITY_SET

#define traceTASK_PRIORITY_SET( pxTask, uxNewPriority )

#endif

#ifndef traceTASK_SUSPEND

#define traceTASK_SUSPEND( pxTaskToSuspend )

#endif

#ifndef traceTASK_RESUME

#define traceTASK_RESUME( pxTaskToResume )

#endif

#ifndef traceTASK_RESUME_FROM_ISR

#define traceTASK_RESUME_FROM_ISR( pxTaskToResume )

#endif

#ifndef traceTASK_INCREMENT_TICK

#define traceTASK_INCREMENT_TICK( xTickCount )

#endif

#ifndef traceTIMER_CREATE

#define traceTIMER_CREATE( pxNewTimer )

#endif

#ifndef traceTIMER_CREATE_FAILED

#define traceTIMER_CREATE_FAILED()

#endif

#ifndef traceTIMER_COMMAND_SEND

#define traceTIMER_COMMAND_SEND( xTimer, xMessageID, xMessageValueValue, xReturn )

#endif

#ifndef traceTIMER_EXPIRED

#define traceTIMER_EXPIRED( pxTimer )

#endif

#ifndef traceTIMER_COMMAND_RECEIVED

#define traceTIMER_COMMAND_RECEIVED( pxTimer, xMessageID, xMessageValue )

#endif

#ifndef traceMALLOC

#define traceMALLOC( pvAddress, uiSize )

#endif

#ifndef traceFREE

#define traceFREE( pvAddress, uiSize )

#endif

#ifndef traceEVENT_GROUP_CREATE

#define traceEVENT_GROUP_CREATE( xEventGroup )

#endif

#ifndef traceEVENT_GROUP_CREATE_FAILED

#define traceEVENT_GROUP_CREATE_FAILED()

#endif

#ifndef traceEVENT_GROUP_SYNC_BLOCK

#define traceEVENT_GROUP_SYNC_BLOCK( xEventGroup, uxBitsToSet, uxBitsToWaitFor )

#endif

#ifndef traceEVENT_GROUP_SYNC_END

#define traceEVENT_GROUP_SYNC_END( xEventGroup, uxBitsToSet, uxBitsToWaitFor, xTimeoutOccurred ) ( void ) xTimeoutOccurred

#endif

#ifndef traceEVENT_GROUP_WAIT_BITS_BLOCK

#define traceEVENT_GROUP_WAIT_BITS_BLOCK( xEventGroup, uxBitsToWaitFor )

#endif

#ifndef traceEVENT_GROUP_WAIT_BITS_END

#define traceEVENT_GROUP_WAIT_BITS_END( xEventGroup, uxBitsToWaitFor, xTimeoutOccurred ) ( void ) xTimeoutOccurred

#endif

#ifndef traceEVENT_GROUP_CLEAR_BITS

#define traceEVENT_GROUP_CLEAR_BITS( xEventGroup, uxBitsToClear )

#endif

#ifndef traceEVENT_GROUP_CLEAR_BITS_FROM_ISR

#define traceEVENT_GROUP_CLEAR_BITS_FROM_ISR( xEventGroup, uxBitsToClear )

#endif

#ifndef traceEVENT_GROUP_SET_BITS

#define traceEVENT_GROUP_SET_BITS( xEventGroup, uxBitsToSet )

#endif

#ifndef traceEVENT_GROUP_SET_BITS_FROM_ISR

#define traceEVENT_GROUP_SET_BITS_FROM_ISR( xEventGroup, uxBitsToSet )

#endif

#ifndef traceEVENT_GROUP_DELETE

#define traceEVENT_GROUP_DELETE( xEventGroup )

#endif

#ifndef tracePEND_FUNC_CALL

#define tracePEND_FUNC_CALL( xFunctionToPend, pvParameter1, ulParameter2, ret )

#endif

#ifndef tracePEND_FUNC_CALL_FROM_ISR

#define tracePEND_FUNC_CALL_FROM_ISR( xFunctionToPend, pvParameter1, ulParameter2, ret )

#endif

#ifndef traceQUEUE_REGISTRY_ADD

#define traceQUEUE_REGISTRY_ADD( xQueue, pcQueueName )

#endif

#ifndef traceTASK_NOTIFY_TAKE_BLOCK

#define traceTASK_NOTIFY_TAKE_BLOCK( uxIndexToWait )

#endif

#ifndef traceTASK_NOTIFY_TAKE

#define traceTASK_NOTIFY_TAKE( uxIndexToWait )

#endif

#ifndef traceTASK_NOTIFY_WAIT_BLOCK

#define traceTASK_NOTIFY_WAIT_BLOCK( uxIndexToWait )

#endif

#ifndef traceTASK_NOTIFY_WAIT

#define traceTASK_NOTIFY_WAIT( uxIndexToWait )

#endif

#ifndef traceTASK_NOTIFY

#define traceTASK_NOTIFY( uxIndexToNotify )

#endif

#ifndef traceTASK_NOTIFY_FROM_ISR

#define traceTASK_NOTIFY_FROM_ISR( uxIndexToNotify )

#endif

#ifndef traceTASK_NOTIFY_GIVE_FROM_ISR

#define traceTASK_NOTIFY_GIVE_FROM_ISR( uxIndexToNotify )

#endif

#ifndef traceSTREAM_BUFFER_CREATE_FAILED

#define traceSTREAM_BUFFER_CREATE_FAILED( xIsMessageBuffer )

#endif

#ifndef traceSTREAM_BUFFER_CREATE_STATIC_FAILED

#define traceSTREAM_BUFFER_CREATE_STATIC_FAILED( xReturn, xIsMessageBuffer )

#endif

#ifndef traceSTREAM_BUFFER_CREATE

#define traceSTREAM_BUFFER_CREATE( pxStreamBuffer, xIsMessageBuffer )

#endif

#ifndef traceSTREAM_BUFFER_DELETE

#define traceSTREAM_BUFFER_DELETE( xStreamBuffer )

#endif

#ifndef traceSTREAM_BUFFER_RESET

#define traceSTREAM_BUFFER_RESET( xStreamBuffer )

#endif

#ifndef traceBLOCKING_ON_STREAM_BUFFER_SEND

#define traceBLOCKING_ON_STREAM_BUFFER_SEND( xStreamBuffer )

#endif

#ifndef traceSTREAM_BUFFER_SEND

#define traceSTREAM_BUFFER_SEND( xStreamBuffer, xBytesSent )

#endif

#ifndef traceSTREAM_BUFFER_SEND_FAILED

#define traceSTREAM_BUFFER_SEND_FAILED( xStreamBuffer )

#endif

#ifndef traceSTREAM_BUFFER_SEND_FROM_ISR

#define traceSTREAM_BUFFER_SEND_FROM_ISR( xStreamBuffer, xBytesSent )

#endif

#ifndef traceBLOCKING_ON_STREAM_BUFFER_RECEIVE

#define traceBLOCKING_ON_STREAM_BUFFER_RECEIVE( xStreamBuffer )

#endif

#ifndef traceSTREAM_BUFFER_RECEIVE

#define traceSTREAM_BUFFER_RECEIVE( xStreamBuffer, xReceivedLength )

#endif

#ifndef traceSTREAM_BUFFER_RECEIVE_FAILED

#define traceSTREAM_BUFFER_RECEIVE_FAILED( xStreamBuffer )

#endif

#ifndef traceSTREAM_BUFFER_RECEIVE_FROM_ISR

#define traceSTREAM_BUFFER_RECEIVE_FROM_ISR( xStreamBuffer, xReceivedLength )

#endif

#ifndef configGENERATE_RUN_TIME_STATS

#define configGENERATE_RUN_TIME_STATS 0

#endif

#if ( configGENERATE_RUN_TIME_STATS == 1 )

#ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS

#error If configGENERATE_RUN_TIME_STATS is defined then portCONFIGURE_TIMER_FOR_RUN_TIME_STATS must also be defined. portCONFIGURE_TIMER_FOR_RUN_TIME_STATS should call a port layer function to setup a peripheral timer/counter that can then be used as the run time counter time base.

#endif /* portCONFIGURE_TIMER_FOR_RUN_TIME_STATS */

#ifndef portGET_RUN_TIME_COUNTER_VALUE

#ifndef portALT_GET_RUN_TIME_COUNTER_VALUE

#error If configGENERATE_RUN_TIME_STATS is defined then either portGET_RUN_TIME_COUNTER_VALUE or portALT_GET_RUN_TIME_COUNTER_VALUE must also be defined. See the examples provided and the FreeRTOS web site for more information.

#endif /* portALT_GET_RUN_TIME_COUNTER_VALUE */

#endif /* portGET_RUN_TIME_COUNTER_VALUE */

#endif /* configGENERATE_RUN_TIME_STATS */

#ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS

#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS()

#endif

#ifndef configUSE_MALLOC_FAILED_HOOK

#define configUSE_MALLOC_FAILED_HOOK 0

#endif

#ifndef portPRIVILEGE_BIT

#define portPRIVILEGE_BIT ( ( UBaseType_t ) 0x00 )

#endif

#ifndef portYIELD_WITHIN_API

#define portYIELD_WITHIN_API portYIELD

#endif

#ifndef portSUPPRESS_TICKS_AND_SLEEP

#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime )

#endif

#ifndef configEXPECTED_IDLE_TIME_BEFORE_SLEEP

#define configEXPECTED_IDLE_TIME_BEFORE_SLEEP 2

#endif

#if configEXPECTED_IDLE_TIME_BEFORE_SLEEP < 2

#error configEXPECTED_IDLE_TIME_BEFORE_SLEEP must not be less than 2

#endif

#ifndef configUSE_TICKLESS_IDLE

#define configUSE_TICKLESS_IDLE 0

#endif

#ifndef configPRE_SUPPRESS_TICKS_AND_SLEEP_PROCESSING

#define configPRE_SUPPRESS_TICKS_AND_SLEEP_PROCESSING( x )

#endif

#ifndef configPRE_SLEEP_PROCESSING

#define configPRE_SLEEP_PROCESSING( x )

#endif

#ifndef configPOST_SLEEP_PROCESSING

#define configPOST_SLEEP_PROCESSING( x )

#endif

#ifndef configUSE_QUEUE_SETS

#define configUSE_QUEUE_SETS 0

#endif

#ifndef portTASK_USES_FLOATING_POINT

#define portTASK_USES_FLOATING_POINT()

#endif

#ifndef portALLOCATE_SECURE_CONTEXT

#define portALLOCATE_SECURE_CONTEXT( ulSecureStackSize )

#endif

#ifndef portDONT_DISCARD

#define portDONT_DISCARD

#endif

#ifndef configUSE_TIME_SLICING

#define configUSE_TIME_SLICING 1

#endif

#ifndef configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS

#define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 0

#endif

#ifndef configUSE_STATS_FORMATTING_FUNCTIONS

#define configUSE_STATS_FORMATTING_FUNCTIONS 0

#endif

#ifndef portASSERT_IF_INTERRUPT_PRIORITY_INVALID

#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID()

#endif

#ifndef configUSE_TRACE_FACILITY

#define configUSE_TRACE_FACILITY 0

#endif

#ifndef mtCOVERAGE_TEST_MARKER

#define mtCOVERAGE_TEST_MARKER()

#endif

#ifndef mtCOVERAGE_TEST_DELAY

#define mtCOVERAGE_TEST_DELAY()

#endif

#ifndef portASSERT_IF_IN_ISR

#define portASSERT_IF_IN_ISR()

#endif

#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION

#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0

#endif

#ifndef configAPPLICATION_ALLOCATED_HEAP

#define configAPPLICATION_ALLOCATED_HEAP 0

#endif

#ifndef configUSE_TASK_NOTIFICATIONS

#define configUSE_TASK_NOTIFICATIONS 1

#endif

#ifndef configTASK_NOTIFICATION_ARRAY_ENTRIES

#define configTASK_NOTIFICATION_ARRAY_ENTRIES 1

#endif

#if configTASK_NOTIFICATION_ARRAY_ENTRIES < 1

#error configTASK_NOTIFICATION_ARRAY_ENTRIES must be at least 1

#endif

#ifndef configUSE_POSIX_ERRNO

#define configUSE_POSIX_ERRNO 0

#endif

#ifndef portTICK_TYPE_IS_ATOMIC

#define portTICK_TYPE_IS_ATOMIC 0

#endif

#ifndef configSUPPORT_STATIC_ALLOCATION

/* Defaults to 0 for backward compatibility. */

#define configSUPPORT_STATIC_ALLOCATION 0

#endif

#ifndef configSUPPORT_DYNAMIC_ALLOCATION

/* Defaults to 1 for backward compatibility. */

#define configSUPPORT_DYNAMIC_ALLOCATION 1

#endif

#ifndef configSTACK_DEPTH_TYPE

/* Defaults to uint16_t for backward compatibility, but can be overridden

* in FreeRTOSConfig.h if uint16_t is too restrictive. */

#define configSTACK_DEPTH_TYPE uint16_t

#endif

#ifndef configMESSAGE_BUFFER_LENGTH_TYPE

/* Defaults to size_t for backward compatibility, but can be overridden

* in FreeRTOSConfig.h if lengths will always be less than the number of bytes

* in a size_t. */

#define configMESSAGE_BUFFER_LENGTH_TYPE size_t

#endif

/* Sanity check the configuration. */

#if ( configUSE_TICKLESS_IDLE != 0 )

#if ( INCLUDE_vTaskSuspend != 1 )

#error INCLUDE_vTaskSuspend must be set to 1 if configUSE_TICKLESS_IDLE is not set to 0

#endif /* INCLUDE_vTaskSuspend */

#endif /* configUSE_TICKLESS_IDLE */

#if ( ( configSUPPORT_STATIC_ALLOCATION == 0 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 0 ) )

#error configSUPPORT_STATIC_ALLOCATION and configSUPPORT_DYNAMIC_ALLOCATION cannot both be 0, but can both be 1.

#endif

#if ( ( configUSE_RECURSIVE_MUTEXES == 1 ) && ( configUSE_MUTEXES != 1 ) )

#error configUSE_MUTEXES must be set to 1 to use recursive mutexes

#endif

#ifndef configINITIAL_TICK_COUNT

#define configINITIAL_TICK_COUNT 0

#endif

#if ( portTICK_TYPE_IS_ATOMIC == 0 )

/* Either variables of tick type cannot be read atomically, or

* portTICK_TYPE_IS_ATOMIC was not set - map the critical sections used when

* the tick count is returned to the standard critical section macros. */

#define portTICK_TYPE_ENTER_CRITICAL() portENTER_CRITICAL()

#define portTICK_TYPE_EXIT_CRITICAL() portEXIT_CRITICAL()

#define portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR() portSET_INTERRUPT_MASK_FROM_ISR()

#define portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( x ) portCLEAR_INTERRUPT_MASK_FROM_ISR( ( x ) )

#else

/* The tick type can be read atomically, so critical sections used when the

* tick count is returned can be defined away. */

#define portTICK_TYPE_ENTER_CRITICAL()

#define portTICK_TYPE_EXIT_CRITICAL()

#define portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR() 0

#define portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( x ) ( void ) x

#endif /* if ( portTICK_TYPE_IS_ATOMIC == 0 ) */

/* Definitions to allow backward compatibility with FreeRTOS versions prior to

* V8 if desired. */

#ifndef configENABLE_BACKWARD_COMPATIBILITY

#define configENABLE_BACKWARD_COMPATIBILITY 0

#endif

#ifndef configPRINTF

/* configPRINTF() was not defined, so define it away to nothing. To use

* configPRINTF() then define it as follows (where MyPrintFunction() is

* provided by the application writer):

*

* void MyPrintFunction(const char *pcFormat, ... );

#define configPRINTF( X ) MyPrintFunction X

*

* Then call like a standard printf() function, but placing brackets around

* all parameters so they are passed as a single parameter. For example:

* configPRINTF( ("Value = %d", MyVariable) ); */

#define configPRINTF( X )

#endif

#ifndef configMAX

/* The application writer has not provided their own MAX macro, so define

* the following generic implementation. */

#define configMAX( a, b ) ( ( ( a ) > ( b ) ) ? ( a ) : ( b ) )

#endif

#ifndef configMIN

/* The application writer has not provided their own MAX macro, so define

* the following generic implementation. */

#define configMIN( a, b ) ( ( ( a ) < ( b ) ) ? ( a ) : ( b ) )

#endif

#if configENABLE_BACKWARD_COMPATIBILITY == 1

#define eTaskStateGet eTaskGetState

#define portTickType TickType_t

#define xTaskHandle TaskHandle_t

#define xQueueHandle QueueHandle_t

#define xSemaphoreHandle SemaphoreHandle_t

#define xQueueSetHandle QueueSetHandle_t

#define xQueueSetMemberHandle QueueSetMemberHandle_t

#define xTimeOutType TimeOut_t

#define xMemoryRegion MemoryRegion_t

#define xTaskParameters TaskParameters_t

#define xTaskStatusType TaskStatus_t

#define xTimerHandle TimerHandle_t

#define xCoRoutineHandle CoRoutineHandle_t

#define pdTASK_HOOK_CODE TaskHookFunction_t

#define portTICK_RATE_MS portTICK_PERIOD_MS

#define pcTaskGetTaskName pcTaskGetName

#define pcTimerGetTimerName pcTimerGetName

#define pcQueueGetQueueName pcQueueGetName

#define vTaskGetTaskInfo vTaskGetInfo

#define xTaskGetIdleRunTimeCounter ulTaskGetIdleRunTimeCounter

/* Backward compatibility within the scheduler code only - these definitions

* are not really required but are included for completeness. */

#define tmrTIMER_CALLBACK TimerCallbackFunction_t

#define pdTASK_CODE TaskFunction_t

#define xListItem ListItem_t

#define xList List_t

/* For libraries that break the list data hiding, and access list structure

* members directly (which is not supposed to be done). */

#define pxContainer pvContainer

#endif /* configENABLE_BACKWARD_COMPATIBILITY */

#if ( configUSE_ALTERNATIVE_API != 0 )

#error The alternative API was deprecated some time ago, and was removed in FreeRTOS V9.0 0

#endif