diff --git a/README.md b/README.md index bca7ee5..b866337 100644 --- a/README.md +++ b/README.md @@ -1,50 +1,61 @@ ![ArduinoThread Logo](https://raw.githubusercontent.com/ivanseidel/ArduinoThread/master/extras/ArduinoThread.png) -Arduino does not support "REAL" parallel tasks (aka Threads), but we can make use of this Library to -improve our code, and easily schedule tasks with fixed (or variable) time between runs. - -This Library helps to maintain organized and to facilitate the use of multiple tasks. We can -use Timers Interrupts, and make it really powerfull, running "pseudo-background" tasks under the rug. - -For example, I personaly use it for all my projects, and put all sensor aquisition and -filtering inside it, leaving the main loop, just for logic and "cool" part. - -#### ArduinoThreads is a library for managing the periodic execution of multiple tasks. - -Blinking an LED is often the very first thing an Arduino user learns. And this demonstrates that periodically performing one single task, like toggling the LED state, is really easy. However, one may quickly discover that managing multiple periodic tasks is not so simple if the tasks have different execution periods. - -ArduinoThreads is designed to simplify programs that need to perform multiple periodic tasks. The user defines a Thread object for each of those tasks, then lets the library manage their scheduled execution. - -It should be noted that these are not “threads” in the real computer-science meaning of the term: tasks are implemented as functions that are periodically run to completion. On the one hand, this means that the only way a task can “yield” the CPU is by returning to the caller, and it is thus inadvisable to delay() or do long waits inside a task. On the other hand, this makes ArduinoThreads memory friendly, as no stack needs to be allocated per task. +## ArduinoThreads Motivation +Arduino does not support isolated parallel tasks ([Threads](https://en.wikipedia.org/wiki/Thread_(computing))), +but we can make the main `loop` switch function execution conditionally and +thus simulate threading with [Protothread](https://en.wikipedia.org/wiki/Protothread) mechanism. +This library implements it and helps you to: + +- schedule, manage and simplify parallel, periodic tasks +- define fixed or variable time between runs +- organize the code in any type of project + - put all sensor readings in a thread + - keep the main loop clean +- hide the complexity of thread management +- run "pseudo-background" tasks using Timer interrupts + +Blinking an LED is often the very first thing an Arduino user learns. +And this demonstrates that periodically performing one single task, like toggling the LED state, is really easy. +However, one may quickly discover that managing multiple periodic tasks is not so simple +if the tasks have different schedule. + +The user defines a Thread object for each of those tasks, then lets the library manage their scheduled execution. + +It should be noted that these are not “threads” in the real computer-science meaning of the term: +tasks are implemented as functions that are run periodically. +On the one hand, this means that the only way a task can *yield* the CPU is by returning to the caller, +and it is thus inadvisable to `delay()` or do long waits inside any task. +On the other hand, this makes ArduinoThreads memory friendly, as no stack need to be allocated per task. ## Installation -1. "Download":https://github.com/ivanseidel/ArduinoThread/archive/master.zip the Master branch from gitHub. -2. Unzip and modify the Folder name to "ArduinoThread" (Remove the '-master') +1. Download [the Master branch](https://github.com/ivanseidel/ArduinoThread/archive/master.zip) from gitHub. +2. Unzip and modify the Folder name to "ArduinoThread" (Remove the '-master' suffix) 3. Paste the modified folder on your Library folder (On your `Libraries` folder inside Sketchbooks or Arduino software). -4. Restart Arduino IDE +4. Restart the Arduino IDE -**If you are here, because another Library requires this class, just don't waste time reading bellow. Install and ready.** +**If you are here just because another library requires a class from ArduinoThread, then you are done now +.** ## Getting Started -There are many examples showing many ways to use it. Here, we will explain Class itself, -what it does and "how" it does. +There are many examples showing many ways to use it. We will explain Class itself, +what it does and how it does. -There are basicaly, three Classes included in this Library: -`Thread`, `ThreadController` and `StaticThreadController` (both controllers inherit from Thread). +There are three main classes included in the library: +`Thread`, `ThreadController` and `StaticThreadController` (both controllers inherit from `Thread`). -- `Thread class`: This is the basic class, witch contains methods to set and run callbacks, - check if the Thread should be runned, and also creates a unique ThreadID on the instantiation. +- `Thread`: Basic class, witch contains methods to set and run callbacks, + check if the Thread should be run, and also creates a unique ThreadID on the instantiation. -- `ThreadController class`: Responsable for "holding" multiple Threads. Can also be called - as "a group of Threads", and is used to perform run in every Thread ONLY when needed. +- `ThreadController`: Responsible for managing multiple Threads. Can also be thought of + as "a group of Threads", and is used to perform `run` in every Thread ONLY when needed. -- `StaticThreadController class`: Slighly faster and smaller version of `ThreadController`. +- `StaticThreadController`: Slightly faster and smaller version of the `ThreadController`. It works similar to `ThreadController`, but once constructed it can't add or remove threads to run. -* The instantiation of a Thread class is very simple: +#### Create Thread instance: ```c++ Thread myThread = Thread(); @@ -52,8 +63,8 @@ Thread myThread = Thread(); Thread* myThread = new Thread(); ``` - -* Setting up a thread is essential. You can configure many things: +#### Setup thread behaviour +You can configure many things: ```c++ myThread.enabled = true; // Default enabled value is true @@ -68,28 +79,26 @@ myThread.ThreadName = "myThread tag"; myThread.onRun(callback_function); // callback_function is the name of the function ``` -Ok, creating Threads are not so hard. But what do we do with them now? - -* First, let's see how Threads should work, to understand what a `ThreadController` is and does +#### Running threads manually +Ok, creating threads isn't too hard, but what do we do with them? ```c++ -// First check if our Thread "should" be runned +// First check if our Thread should be run if(myThread.shouldRun()){ - // Yes, the Thread should be runned, let's run it + // Yes, the Thread should run, let's run it myThread.run(); } ``` -Now that you got the idea, let's think a little bit: What if i have 3, 5, 100 Threads. Do I need to check EACH one?!? - -* The answer is: NO. Create a `ThreadController` or `StaticThreadController`, -and put all your boring-complex Threads inside it! +#### Running threads via a controller +If you had 3, 5 or 100 threads, managing them manually could become tedious. +That's when `ThreadController` or `StaticThreadController` comes into play and saves you the repetitive thread management parts of code. ```c++ -// Instantiate a new ThreadController +// Instantiate new ThreadController ThreadController controller = ThreadController(); -// Now, put a bunch of Threads inside it, FEED it! -controller.add(&myThread); // Notice the & before the thread, IF it's not instantied as a pointer. +// Now, put bunch of Threads inside it, FEED it! +controller.add(&myThread); // Notice the '&' sign before the thread, IF it's not instantied as a pointer. controller.add(&hisThread); controller.add(&sensorReadings); ... @@ -102,58 +111,56 @@ StaticThreadController<3> controller (&myThread, &hisThread, &sensorReadings); ... ``` -* You have created, configured, grouped it. What is missing? Yes, whe should RUN it! +You have created, configured, grouped it. What is missing? Yes, whe should RUN it! +The following will run all the threads that NEED to run. ```c++ // call run on a Thread, a ThreadController or a StaticThreadController to run it controller.run(); ``` -This will run all the Threads that NEED to be runned. - -Congratulations, you have learned the basics of `ArduinoThread`. If you want some TIPS, see bellow. +Congratulations, you have learned the basics of the `ArduinoThread` library. If you want to learn more, see bellow. +### Tips and Warnings -### TIPs and Warnings +* `ThreadController` is not of a dynamic size (like a `LinkedList`). The maximum number of threads that it can manage + is defined in `ThreadController.h` (default is 15) -* ThreadController is not a `LinkedList`. It's "MAXIMUM" size (the maximum Threads that it can - store) is defined on ThreadController.h (default is 15) +* ☢ When extending the `Thread` class and overriding the `run()` function, + remember to always call `runned();` at the end, otherwise the thread will hang forever. -* !!!! VERY IMPORTANT !!!! When extending `Thread` class and implementing the function - `run()`, always remember to put `runned();` after all, otherwhise the `Thread` will ALWAYS run. - -* It's a good idea, to create a Timer interrupt and call a ThreadController.run() there. +* It's a good idea, to create a `Timer` interrupt and call a `ThreadController.run()` there. That way, you don't need to worry about reading sensors and doing time-sensitive stuff -on your main code (loop). Check `ControllerWithTimer` example. +in your main code (`loop`). Check `ControllerWithTimer` example. * Inheriting from `Thread` or even `ThreadController` is always a good idea. For example, I always create base classes of sensors that extends `Thread`, -so that I can "register" the sensors inside a ThreadController, and forget -about really reading sensors, just getting theirs values within my main code. -Checkout `SensorThread` example. - -* Remember that `ThreadController` is in fact, a Thread. If you want to enable -or disable a GROUP of Threads, think about putting all of them inside a ThreadController, -and adding this ThreadController to another ThreadController (YES! One ThreadController -inside another). Check `ControllerInController` example. - -* There is a `StaticThreadController` which is better to use when you know exact number of -threads to run. You cannot add or remove threads in runtime, but `StaticThreadController` -doesn't have additional memory overhead to keep all the treads together, doesn't have any -limitations how many threads to store (except of available memory) and also the code may be slighly -more optimized because all the threads always exist and no need to do any runtime checks. - -* Check the full example `CustomTimedThread` for a cool application of Threads that runs +so that I can "register" the sensors inside a `ThreadController`, and forget +about reading sensors, just having the values available in my main code. +Check the `SensorThread` example. + +* Remember that `ThreadController` is in fact, a `Thread` itself. If you want to group threads and +manage them together (enable or disable), think about putting all of them inside a `ThreadController`, +and adding this `ThreadController` to another `ThreadController` (YES! One inside another). +Check `ControllerInController` example. + +* `StaticThreadController` is optimal when you know the exact number of +threads to run. You cannot add or remove threads at runtime, but it +doesn't require additional memory to keep all the treads together, doesn't limit the number of thread +(except for available memory) and the code may be slightly +better optimized because all the threads always exist and no need to do any runtime checks. + +* Check the full example `CustomTimedThread` for a cool application of threads that run for a period, after a button is pressed. -* Running tasks on the Timer interrupts must be tought REALLY carefully +* Running tasks on the `Timer` interrupts must be thought though REALLY carefully - You cannot use "sleep()" inside a interrupt, because it will get into a infinite loop. + - You mustn't use `sleep()` inside an interrupt, because it would cause an infinite loop. - Things must do stuff quickly. Waiting too loooong on a interrupt, means waiting too - loooong on the main code (loop) + - Things execute quickly. Waiting too loooong on a interrupt, means waiting too + loooong on the main code (`loop`) - Things might get "scrambled". Since Timers interrupts actualy "BREAK" your code in half + - Things might get "scrambled". Since Timers interrupts actually "BREAK" your code in half and start running the interrupt, you might want to call `noInterrupts` and `interrupts` on places where cannot be interrupted: @@ -162,44 +169,40 @@ noInterrupts(); // Put the code that CANNOT be interrupted... interrupts(); // This will enable the interrupts egain. DO NOT FORGET! ``` - - ## Library Reference -### You should know: - -- `bool Thread::enabled` - Enables or disables the Thread. (do not stop it from running, but will - return false when shouldRun() is called) -- `void Thread::setInterval()` - Setts the desired interval for the Thread (in Ms). -- `bool Thread::shouldRun()` - Returns true, if the Thread should be runned. - (Basicaly,the logic is: (reached time AND is enabled?). +### Configuration options +#### Thread +- `bool Thread::enabled` - Enables or disables the thread. (doesn't prevent it from running, but will + return `false` when `shouldRun()` is called) +- `void Thread::setInterval()` - Schedules the thread run interval in milliseconds +- `bool Thread::shouldRun()` - Returns true, if the thread should be run. + (Basically,the logic is: (reached time AND is enabled?). - `void Thread::onRun()` - The target callback function to be called. -- `void Thread::run()` - This will run the Thread (call the callback function). -- `int Thread::ThreadID` - Theoretically, it's the address of memory. It's unique, and can +- `void Thread::run()` - Runs the thread (executes the callback function). +- `int Thread::ThreadID` - Theoretically, it's the memory address. It's unique, and can be used to compare if two threads are identical. -- `int Thread::ThreadName` - A human-redable thread name. Default is "Thread ThreadID" - eg.: "Thread 141515"; Note that to enable this attribute, you must uncomment the line that disables it on 'Thread.h'; -- protected: `void Thread::runned()` - Used to reset internal timer of the Thread. - This is automaticaly called AFTER a call to `run()`. - - -- `void ThreadController::run()` - This will run the all `Threads` within the `ThreadController`, - only if needed (if shouldRun returns true); -- `bool ThreadController::add(Thread* _thread)` - This will add a the thread to the ThreadController, - and return `true` if suceeded (it the array is full, returns false). -- `void ThreadController::remove(Thread* _thread)` - This will remove the Thread from the ThreadController. -- `void ThreadController::remove(int index)` - This will remove the thread on the position `index`. -- `void ThreadController::clear()` - This will remove ALL threads from the ThreadController array. -- `int ThreadController::size(bool cached = true)` - Returns how many Threads are allocated - inside the ThreadController. If cached is `false`, will force the calculation of threads. -- `Thread* ThreadController::get(int index)` - Returns the Thread on the position `index`. - - -- `void StaticThreadController::run()` - This will run the all `Threads` within the `StaicThreadController`, - only if needed (if shouldRun returns true); -- `int StaticThreadController::size()` - Returns how many Threads are allocated inside the StaticThreadController. -- `Thread* ThreadController::get(int index)` - Returns the Thread on the position `index` and `nullptr` if `index` +- `int Thread::ThreadName` - A human-readable thread name. + Default is "Thread ThreadID", eg.: "Thread 141515". + Note that to enable this attribute, you must uncomment the line that disables it on `Thread.h` +- protected: `void Thread::runned()` - Used to reset internal timer of the thread. + This is automatically called AFTER a call to `run()`. + +#### ThreadController +- `void ThreadController::run()` - Runs the all threads grouped by the controller, + but only if needed (if `shouldRun()` returns true); +- `bool ThreadController::add(Thread* _thread)` - Adds a the thread to the controller, + and returns `true` if succeeded (returns false if the array is full). +- `void ThreadController::remove(Thread* _thread)` - Removes the thread from the controller +- `void ThreadController::remove(int index)` - Removes the thread at the `index` position +- `void ThreadController::clear()` - Removes ALL threads from the controller +- `int ThreadController::size(bool cached = true)` - Returns number of threads allocated + in the ThreadController. Re-calculates thread count if `cached` is `false` +- `Thread* ThreadController::get(int index)` - Returns the thread at the `index` position + +#### StaticThreadController +- `void StaticThreadController::run()` - Runs all the threads within the controller, + but only if needed (if `shouldRun()` returns true); +- `int StaticThreadController::size()` - Returns how many Threads are allocated inside the controller. +- `Thread* ThreadController::get(int index)` - Returns the thread at the `index` position - or `nullptr` if `index` is out of bounds. - -### You don't need to know: -- Nothing, yet ;) diff --git a/Thread.cpp b/Thread.cpp index 8d5d8ee..cd29d98 100644 --- a/Thread.cpp +++ b/Thread.cpp @@ -4,7 +4,7 @@ Thread::Thread(void (*callback)(void), unsigned long _interval){ enabled = true; onRun(callback); _cached_next_run = 0; - last_run = 0; + last_run = millis(); ThreadID = (int)this; #ifdef USE_THREAD_NAMES diff --git a/ThreadController.cpp b/ThreadController.cpp index af5f1d9..7d8e41c 100644 --- a/ThreadController.cpp +++ b/ThreadController.cpp @@ -24,7 +24,7 @@ void ThreadController::run(){ unsigned long time = millis(); int checks = 0; - for(int i = 0; i < MAX_THREADS && checks <= cached_size; i++){ + for(int i = 0; i < MAX_THREADS && checks < cached_size; i++){ // Object exists? Is enabled? Timeout exceeded? if(thread[i]){ checks++; @@ -65,7 +65,6 @@ bool ThreadController::add(Thread* _thread){ void ThreadController::remove(int id){ // Find Threads with the id, and removes - bool found = false; for(int i = 0; i < MAX_THREADS; i++){ if(thread[i]->ThreadID == id){ thread[i] = NULL; diff --git a/examples/CustomTimedThread/CustomTimedThread.ino b/examples/CustomTimedThread/CustomTimedThread.ino index 9d2d7d8..146715d 100644 --- a/examples/CustomTimedThread/CustomTimedThread.ino +++ b/examples/CustomTimedThread/CustomTimedThread.ino @@ -49,7 +49,7 @@ =============== WHAT YO LEARN WITH THIS ================= 1) Threads are actually running in 'parallel'. - Synce each thread process time is very tiny, they appear + Since each thread process time is very tiny, they appear as being runned in parallel. Because of that, clicking multiple buttons at any time, @@ -113,7 +113,7 @@ public: "Old" default Thread method 'shouldRun' return if it should run. */ - bool shouldRun(long time){ + bool shouldRun(unsigned long time){ // Override enabled on thread when pin goes LOW. if(digitalRead(pin) == LOW){ enabled = true; @@ -254,4 +254,4 @@ void setup(){ void loop(){ // Here we just run the main thread controller controll.run(); -} \ No newline at end of file +} diff --git a/library.properties b/library.properties index 1494795..59eed7a 100644 --- a/library.properties +++ b/library.properties @@ -1,5 +1,5 @@ name=ArduinoThread -version=2.1.0 +version=2.1.1 author=Ivan Seidel maintainer=Ivan Seidel sentence=A simple way to run Threads on Arduino