using System;

using System.Collections.Generic;

using System.Linq;

using System.Text;

using System.Threading.Tasks;

namespace STBootLib

{

/* command list */

public enum STCmds

{

/* this is used by bootloader to determine the baudrate */

INIT = 0x7F,

/* Gets the version and the allowed commands supported

* by the current version of the bootloader */

GET = 0x00,

/* Gets the bootloader version and the Read Protection

* status of the Flash memory */

GET_PROT = 0x01,

/* Gets the chip ID */

GET_ID = 0x02,

/* Reads up to 256 bytes of memory starting from an

* address specified by the application */

READ = 0x11,

/* Jumps to user application code located in the internal

* Flash memory or in SRAM */

GO = 0x21,

/* Writes up to 256 bytes to the RAM or Flash memory starting

* from an address specified by the application */

WRITE = 0x31,

/* Erases from one to all the Flash memory pages */

ERASE = 0x43,

/* Erases from one to all the Flash memory pages using

* two byte addressing mode (available only for v3.0 usart

* bootloader versions and above). */

EXT_ERASE = 0x44,

/* Enables the write protection for some sectors */

WR_PROTECT = 0x63,

/* Disables the write protection for all Flash memory sectors */

WR_UNPROTECT = 0x73,

/* Enables the read protection */

RD_PROTECT = 0x82,

/* Disables the read protection */

RD_UNPROTECT = 0x92

}

/* special erase mode for normal erase command */

public enum STEraseMode

{

/* erase all sectors */

GLOBAL = 0xff,

}

/* special erase mode for normal erase command */

public enum STExtendedEraseMode

{

/* erase all sectors */

GLOBAL = 0xffff,

/* erase bank 1 */

BANK1 = 0xfffe,

/* erase bank 2 */

BANK2 = 0xfffd

}

}